• Converting from PostScript to EWM (Enhanced Windows Metafile) using pstoedit (2004/12/06)
  PostScriptからpstoedit(2004/12/06)を利用したEWM(拡張Windows Metafile)までの変えること
• POD ERRORS
  鞘エラー

Converting from PostScript to EWM (Enhanced Windows Metafile) using pstoedit (2004/12/06)
PostScriptからpstoedit(2004/12/06)を利用したEWM(拡張Windows Metafile)へ変える

[Japanese]
[日本語]

On UNIX systems, the most widely-used file format for vector-based graphics is Adobe's PostScript format and its extension called EPS (Encapsulated PostScript). Almost all graphic applications running on UNIX systems can generate in PostSciprt format. PostSciprt files are very handy on UNIX systems, but it is sometimes nasty to handle these files on Microsoft Windows. In what follows, I will explain how PostSciprt files (and equivalently, EPS files) can be converted to EWM (Enhanced Windows Metafile).
Unixシステムで、ベクトル・ベースのグラフィックのためのほとんどの広く使われたファイル形式は、EP(カプセル化ポストスクリプト)と呼ばれるAdobeのPostScript形式とその拡張だ。ほとんど、Unixシステム上で動作している全く写実的なアプリケーションは、PostSciprtで形式を生みだすことができる。PostSciprtファイルは、Unixシステムでとても便利だ、しかし、Microsoft Windowsでこれらのファイルを処理することは、時々いやだ。どのような追随で、私は、どのようにPostSciprtファイル(と同等にEPファイル)がEWM(拡張Windows Metafile)に変えられることができるかを説明するだろう。

1. Install libEMF (http://libemf.sourceforge.net/) and pstoedit (http://www.pstoedit.net/pstoedit).
1. libEMF(http://libemf.sourceforge.net/)とpstoedit(http://www.pstoedit.net/pstoedit)をインストールせよ。

I recommend to use pstoedit for converting from PostSciprt to EWM (Enhanced Windows Metafile). Note that libEMF must be installed before installig pstoedit. After compilation and installation of pstoedit, make sure that the emf driver has been successfully compiled in.
私は、PostSciprtからEWM(拡張Windows Metafile)へ変えるためのpstoeditを使うために、推薦する。libEMFがinstallig pstoeditの前にインストールされなくてはいけないことに注意せよ。pstoeditのコンパイルとインストールの後で、emfドライバーがうまくコンパイルされたことを確認せよで。

<lal:NoTranslation>  % pstoedit -f ?
  pstoedit: version 3.33 / DLL interface 108 (build Jun 17 2004 - release build) : Copyright (C) 1993 - 2003 Wolfgang Glunz
  Unsupported driver ?
  Available formats :
          psf:            Flattened PostScript (no curves)        (built-in)
          ps:             Simplified PostScript with curves       (built-in)
          debug:          for test purposes       (built-in)
          dump:           for test purposes (same as debug)       (built-in)
          gs:             any device that GhostScript provides - use gs:format, e.g. gs:pdfwrite  (built-in)
          ps2ai:          Adobe Illustrator via ps2ai.ps of GhostScript   (built-in)
          sample:         sample driver: if you don't want to see this, uncomment the corresponding line in makefile and make again       (/usr/local/lib/pstoedit/libp2edrvstd.so)
          idraw:          Interviews draw format (EPS)    (/usr/local/lib/pstoedit/libp2edrvstd.so)
          fig:            .fig format for xfig    (/usr/local/lib/pstoedit/libp2edrvstd.so)
          xfig:           .fig format for xfig    (/usr/local/lib/pstoedit/libp2edrvstd.so)
          tgif:           Tgif .obj format (for tgif version >= 3)        (/usr/local/lib/pstoedit/libp2edrvstd.so)
          gnuplot:        gnuplot format  (/usr/local/lib/pstoedit/libp2edrvstd.so)
          tk:             tk and/or tk applet source code         (/usr/local/lib/pstoedit/libp2edrvstd.so)
          hpgl:           HPGL code       (/usr/local/lib/pstoedit/libp2edrvstd.so)
          pic:            PIC format for troff et.al.     (/usr/local/lib/pstoedit/libp2edrvstd.so)
          latex2e:        LaTeX2e picture format  (/usr/local/lib/pstoedit/libp2edrvstd.so)
          mma:            Mathematica Graphics    (/usr/local/lib/pstoedit/libp2edrvstd.so)
          mpost:          MetaPost Format         (/usr/local/lib/pstoedit/libp2edrvstd.so)
          sk:             Sketch Format   (/usr/local/lib/pstoedit/libp2edrvstd.so)
          text:           text in different forms         (/usr/local/lib/pstoedit/libp2edrvstd.so)
          kil:            .kil format for Kontour         (/usr/local/lib/pstoedit/libp2edrvstd.so)
          pdf:            Adobe's Portable Document Format        (/usr/local/lib/pstoedit/libp2edrvstd.so)
          java2:          java 2 source code      (/usr/local/lib/pstoedit/libp2edrvstd.so)
          java1:          java 1 applet source code       (/usr/local/lib/pstoedit/libp2edrvstd.so)
          dxf:            CAD exchange format     (/usr/local/lib/pstoedit/libp2edrvstd.so)
          dxf_s:          CAD exchange format with splines        (/usr/local/lib/pstoedit/libp2edrvstd.so)
          rpl:            Real3D Programming Language Format      (/usr/local/lib/pstoedit/libp2edrvstd.so)
          rib:            RenderMan Interface Bytestream  (/usr/local/lib/pstoedit/libp2edrvstd.so)
          lwo:            LightWave 3D Object Format      (/usr/local/lib/pstoedit/libp2edrvstd.so)
          wmf:            Windows metafile        (/usr/local/lib/pstoedit/libp2edrvwmf.so)
          emf:            Enhanced Windows metafile       (/usr/local/lib/pstoedit/libp2edrvwmf.so)</lal:NoTranslation>

% pstoedit -f ? pstoedit: version 3.33 / DLL interface 108 (build Jun 17 2004 - release build) : Copyright (C) 1993 - 2003 Wolfgang Glunz Unsupported driver ? Available formats : psf: Flattened PostScript (no curves) (built-in) ps: Simplified PostScript with curves (built-in) debug: for test purposes (built-in) dump: for test purposes (same as debug) (built-in) gs: any device that GhostScript provides - use gs:format, e.g. gs:pdfwrite (built-in) ps2ai: Adobe Illustrator via ps2ai.ps of GhostScript (built-in) sample: sample driver: if you don't want to see this, uncomment the corresponding line in makefile and make again (/usr/local/lib/pstoedit/libp2edrvstd.so) idraw: Interviews draw format (EPS) (/usr/local/lib/pstoedit/libp2edrvstd.so) fig: .fig format for xfig (/usr/local/lib/pstoedit/libp2edrvstd.so) xfig: .fig format for xfig (/usr/local/lib/pstoedit/libp2edrvstd.so) tgif: Tgif .obj format (for tgif version >= 3) (/usr/local/lib/pstoedit/libp2edrvstd.so) gnuplot: gnuplot format (/usr/local/lib/pstoedit/libp2edrvstd.so) tk: tk and/or tk applet source code (/usr/local/lib/pstoedit/libp2edrvstd.so) hpgl: HPGL code (/usr/local/lib/pstoedit/libp2edrvstd.so) pic: PIC format for troff et.al. (/usr/local/lib/pstoedit/libp2edrvstd.so) latex2e: LaTeX2e picture format (/usr/local/lib/pstoedit/libp2edrvstd.so) mma: Mathematica Graphics (/usr/local/lib/pstoedit/libp2edrvstd.so) mpost: MetaPost Format (/usr/local/lib/pstoedit/libp2edrvstd.so) sk: Sketch Format (/usr/local/lib/pstoedit/libp2edrvstd.so) text: text in different forms (/usr/local/lib/pstoedit/libp2edrvstd.so) kil: .kil format for Kontour (/usr/local/lib/pstoedit/libp2edrvstd.so) pdf: Adobe's Portable Document Format (/usr/local/lib/pstoedit/libp2edrvstd.so) java2: java 2 source code (/usr/local/lib/pstoedit/libp2edrvstd.so) java1: java 1 applet source code (/usr/local/lib/pstoedit/libp2edrvstd.so) dxf: CAD exchange format (/usr/local/lib/pstoedit/libp2edrvstd.so) dxf_s: CAD exchange format with splines (/usr/local/lib/pstoedit/libp2edrvstd.so) rpl: Real3D Programming Language Format (/usr/local/lib/pstoedit/libp2edrvstd.so) rib: RenderMan Interface Bytestream (/usr/local/lib/pstoedit/libp2edrvstd.so) lwo: LightWave 3D Object Format (/usr/local/lib/pstoedit/libp2edrvstd.so) wmf: Windows metafile (/usr/local/lib/pstoedit/libp2edrvwmf.so) emf: Enhanced Windows metafile (/usr/local/lib/pstoedit/libp2edrvwmf.so)

2. Convert from PostSciprt file to Enhanced Windows Metafile
2. PostSciprtファイルから拡張Windows Metafileまでの改宗者

<lal:NoTranslation>  $ pstoedit -f emf file.ps file.wmf</lal:NoTranslation>

$ pstoedit -f emf file.ps file.wmf

If the PostSciprt file has more than a single page, you have to specify '%d' in the output filename, e.g.,
もしPostSciprtファイルがひとつのページ以上を持っていれば、あなたは、「%d」アウトプット・ファイル名で規定する必要がある、例えば、

<lal:NoTranslation>  $ pstoedit -f emf file.ps file%d.wmf</lal:NoTranslation>

$ pstoedit -f emf file.ps file%d.wmf

Also, you can convert from EPS (Encapsulated PostSciprt) to EWM (Enhanced Windows Metafile).
また、あなたは、EP(カプセルに入れられたPostSciprt)からEWMへ変えることができる(拡張Windows Metafile)。

<lal:NoTranslation>  $ pstoedit -f emf file.eps file.wmf</lal:NoTranslation>

$ pstoedit -f emf file.eps file.wmf

3. Insert the generated EWM file into your Windows' application
3. あなたのWindowsのアプリケーションへ生みだされたEWMファイルを挿入せよ

POD ERRORS
鞘エラー

Hey! The above document had some coding errors, which are explained below:
やあ!幾分持たれていた上記の文書が誤りを暗号化すると、以下の下にどちらが説明されるか:

Around line 17:
回線17のあたりに:

=over without closing =back
=を越えて=背中を閉じないで